JEDNOSTAVNO ZA UPOTREBU PLA (polylactide) je biorazgradiv termoplasticni poliester, koji je lak za štampanje na 3D štampacima. Nema miris, ima nižu tacku topljenja. Visoka preciznost omogucava visok kvalitet štampe Nema mehurica Može se primeniti na razlicitim 3D štampacima Material: PLA, 1.75 mm diameter Weight: 1 kg/spool (2.2 lbs) Length: approx. 330 m Density at 21.5 °: 1.24 g / cm3 Melt Flow Index at g / 10 min 200 °C / 5 kg: 7 Melt Point: 190 °C - 220 °C Heat-Deflection-Temperature: 56 °C Yield Strength at 5 mm / min: 66 MPa Impact Strength: 4.8 KJ/m? Ensile Break: 13 % Diameter: 1.75 mm ± 0.05 mm Spool dimensions: 200 mm (diameter) x 67 mm (height) x 53 mm (central hole) System requirements: A 3D printer with 1.75 mm extruder of temperature around 200 °C, suitable for PLA filament Srebrna